• Source: Units of information

In digital computing and telecommunications, a unit of information is the capacity of some standard data storage system or communication channel, used to measure the capacities of other systems and channels. In information theory, units of information are also used to measure information contained in messages and the entropy of random variables.
The most commonly used units of data storage capacity are the bit, the capacity of a system that has only two states, and the byte (or octet), which is equivalent to eight bits. Multiples of these units can be formed from these with the SI prefixes (power-of-ten prefixes) or the newer IEC binary prefixes (power-of-two prefixes).




Primary units



In 1928, Ralph Hartley observed a fundamental storage principle, which was further formalized by Claude Shannon in 1945: the information that can be stored in a system is proportional to the logarithm of N possible states of that system, denoted logb N. Changing the base of the logarithm from b to a different number c has the effect of multiplying the value of the logarithm by a fixed constant, namely logc N = (logc b) logb N.
Therefore, the choice of the base b determines the unit used to measure information. In particular, if b is a positive integer, then the unit is the amount of information that can be stored in a system with b possible states.
When b is 2, the unit is the shannon, equal to the information content of one "bit" (a portmanteau of binary digit). A system with 8 possible states, for example, can store up to log2 8 = 3 bits of information. Other units that have been named include:

Base b = 3
the unit is called "trit", and is equal to log2 3 (≈ 1.585) bits.
Base b = 10
the unit is called decimal digit, hartley, ban, decit, or dit, and is equal to log2 10 (≈ 3.322) bits.
Base b = e, the base of natural logarithms
the unit is called a nat, nit, or nepit (from Neperian), and is worth log2 e (≈ 1.443) bits.
The trit, ban, and nat are rarely used to measure storage capacity; but the nat, in particular, is often used in information theory, because natural logarithms are mathematically more convenient than logarithms in other bases.




Units derived from bit


Several conventional names are used for collections or groups of bits.




= Byte

=
Historically, a byte was the number of bits used to encode a character of text in the computer, which depended on computer hardware architecture, but today it almost always means eight bits – that is, an octet. An 8-bit byte can represent 256 (28) distinct values, such as non-negative integers from 0 to 255, or signed integers from −128 to 127. The IEEE 1541-2002 standard specifies "B" (upper case) as the symbol for byte (IEC 80000-13 uses "o" for octet in French, but also allows "B" in English). Bytes, or multiples thereof, are almost always used to specify the sizes of computer files and the capacity of storage units. Most modern computers and peripheral devices are designed to manipulate data in whole bytes or groups of bytes, rather than individual bits.




= Nibble

=
A group of four bits, or half a byte, is sometimes called a nibble, nybble or nyble. This unit is most often used in the context of hexadecimal number representations, since a nibble has the same number of possible values as one hexadecimal digit has.




= Word, block, and page

=
Computers usually manipulate bits in groups of a fixed size, conventionally called words. The number of bits in a word is usually defined by the size of the registers in the computer's CPU, or by the number of data bits that are fetched from its main memory in a single operation. In the IA-32 architecture more commonly known as x86-32, a word is 32 bits, but other past and current architectures use words with 4, 8, 9, 12, 13, 16, 18, 20, 21, 22, 24, 25, 29, 30, 31, 32, 33, 35, 36, 38, 39, 40, 42, 44, 48, 50, 52, 54, 56, 60, 64, 72 bits or others.
Some machine instructions and computer number formats use two words (a "double word" or "dword"), or four words (a "quad word" or "quad").
Computer memory caches usually operate on blocks of memory that consist of several consecutive words. These units are customarily called cache blocks, or, in CPU caches, cache lines.
Virtual memory systems partition the computer's main storage into even larger units, traditionally called pages.




= Systematic multiples

=

Terms for large quantities of bits can be formed using the standard range of SI prefixes for powers of 10, e.g., kilo = 103 = 1000 (as in kilobit or kbit), mega = 106 = 1000000 (as in megabit or Mbit) and giga = 109 = 1000000000 (as in gigabit or Gbit). These prefixes are more often used for multiples of bytes, as in kilobyte (1 kB = 8000 bit), megabyte (1 MB = 8000000bit), and gigabyte (1 GB = 8000000000bit).
However, for technical reasons, the capacities of computer memories and some storage units are often multiples of some large power of two, such as 228 = 268435456 bytes. To avoid such unwieldy numbers, people have often repurposed the SI prefixes to mean the nearest power of two, e.g., using the prefix kilo for 210 = 1024, mega for 220 = 1048576, and giga for 230 = 1073741824, and so on. For example, a random access memory chip with a capacity of 228 bytes would be referred to as a 256-megabyte chip. The table below illustrates these differences.

In the past, uppercase K has been used instead of lowercase k to indicate 1024 instead of 1000. However, this usage was not consistently applied.
On the other hand, for external storage systems (such as optical discs), the SI prefixes are commonly used with their decimal values (powers of 10). Many attempts have sought to resolve the confusion by providing alternative notations for power-of-two multiples. The International Electrotechnical Commission (IEC) issued a standard for this purpose by defining a series of binary prefixes that use 1024 instead of 1000 as the main radix:

The JEDEC memory standard JESD88F notes that the definitions of kilo (K), giga (G), and mega (M) based on powers of two are included only to reflect common usage, but are otherwise deprecated.




Size examples


1 bit: Answer to a yes/no question
1 byte: A number from 0 to 255
90 bytes: Enough to store a typical line of text from a book
512 bytes = 0.5 KiB: The typical sector size of an old style hard disk drive (modern Advanced Format sectors are 4096 bytes).
1024 bytes = 1 KiB: A block size in some older UNIX filesystems
2048 bytes = 2 KiB: A CD-ROM sector
4096 bytes = 4 KiB: A memory page in x86 (since Intel 80386) and many other architectures, also the modern Advanced Format hard disk drive sector size.
4 kB: About one page of text from a novel
120 kB: The text of a typical pocket book
1 MiB: A 1024×1024 pixel bitmap image with 256 colors (8 bpp color depth)
3 MB: A three-minute song (133 kbit/s)
650–900 MB – a CD-ROM
1 GB: 114 minutes of uncompressed CD-quality audio at 1.4 Mbit/s
16 GB: DDR5 DRAM laptop memory under $40 (as of early 2024)
32/64/128 GB: Three common sizes of USB flash drives
1 TB: The size of a $30 hard disk (as of early 2024)
6 TB: The size of a $100 hard disk (as of early 2022)
16 TB: The size of a small/cheap $130 (as of early 2024) enterprise SAS hard disk drive
24 TB: The size of $440 (as of early 2024) "video" hard disk drive
32 TB: Largest hard disk drive (as of mid-2024)
100 TB: Largest commercially available solid-state drive (as of mid-2024)
200 TB: Largest solid-state drive constructed (prediction for mid-2022)
1.6 PB (1600 TB): Amount of possible storage in one 2U server (world record as of 2021, using 100 TB solid-states drives).
1.3 ZB: Prediction of the volume of the whole internet in 2016




Obsolete and unusual units


Several other units of information storage have been named:

1 bit: unibit
2 bits: dibit, crumb, quartic digit, quad, semi-nibble, nyp
3 bits: tribit, triad, triade
4 bits: character (on Intel 4004 – however, characters are typically 8 bits wide or larger on other processors), for others see nibble
5 bits: pentad, pentade,
6 bits: byte (in early IBM machines using BCD alphamerics), hexad, hexade, sextet
7 bits: heptad, heptade
8 bits: octet, commonly also called byte
9 bits: nonet, rarely used
10 bits: declet, decle
12 bits: slab
15 bits: parcel (on CDC 6600 and CDC 7600)
16 bits: doublet, wyde, parcel (on Cray-1), chawmp (on a 32-bit machine)
18 bits: chomp, chawmp (on a 36-bit machine)
32 bits: quadlet, tetra
64 bits: octlet, octa
96 bits: bentobox (in ITRON OS)
128 bits: hexlet, paragraph (on Intel x86 processors)
256 bytes: page (on Intel 4004, 8080 and 8086 processors, also many other 8-bit processors – typically much larger on many 16-bit/32-bit processors)
6 trits: tryte
combit, comword
Some of these names are jargon, obsolete, or used only in very restricted contexts.




See also


Metric prefix
File size
ISO 80000-13 (Quantities and units – Part 13: Information science and technology)




Notes






References






External links


Representation of numerical values and SI units in character strings for information interchanges
Bit Calculator – Make conversions between bits, bytes, kilobits, kilobytes, megabits, megabytes, gigabits, gigabytes, terabits, terabytes, petabits, petabytes, exabits, exabytes, zettabits, zettabytes, yottabits, yottabytes.
Paper on standardized units for use in information technology
Data Byte Converter
High Precision Data Unit Converters

Kata Kunci Pencarian:

• Asam urat
• Bita
• Amerika Serikat
• Kalori
• PlayStation 2
• MS Freedom of the Seas
• Kepanduan
• Honor (merek)
• Gram
• Temperatur dan tekanan standar
• Units of information
• Information
• Bit
• Logarithmic scale
• Data-rate units
• Unit of measurement
• Nat (unit)
• Information theory
• Unit prefix
• Entropy (information theory)